CE Certification Combined Tester Three StyleTemperature Humidity
and Vibration Test Chamber
THV-408 Vibration and shock test chamber
1. Application:
Temperature and humidity test chamber matched with appropriate
vibration test bench to meet with respective corresponding
environmental test requirements of temperature,
humidity and vibration; extensively applied in aviation and
aerospace, shipping, electronics ,automobile car,
telecommunications, industry.
2 Vibration System( ES-20)
2-1 Technical parameters
(1) Rated Force: sine force 20000N; random force 20000N; shock
force 20000N;
(2) Frequency Range: 3Hz to 3000Hz, Fixed frequency, sweep back and
forth, sine, random, shock, shoc synthesis
and mixed mode vibration.
(3)Sweep-frequency Mode: linear, logarithmic, sweep back and forth,
fixed frequency
(4)Sweep-frequency Times: 1 to 32767
(5)Sweep-frequency Time: fixed frequency/single 1-3600mins,
sweep-frequency curves can be displayed.
(6)Max. Acceleration1000m/s 2 (100g ,non load)
(7)Max. Speed: 51m/s
(8)Max. Displacement:51mmp-p (non load), peak-peak
(9)Shock Displacement: 51mm
(10)Weight of Moving Coil: 30kg
(11)Vibration Directions: vertical vibrating (Z Axis)
(12)Vibration Wave: sine, random, shock, the control spectra, wave,
signal dynamic range can be displayed
(13)Diameter of the Moving Coil: Φ320 mm
(14)Shaker table’s dimension:W750*H650*D550mm
(15)Vibration System weight: 480kg
3 Temperature & Humidity Test System (HL-1000-F)
3-1 About The Whole Chamber
3-1-1 Dimension
(1) Interior : W1000× H1000× D1000mm
AI SI Li (CHINA) TEST EQUIPMENT CO., LTD
Tel.:0086-136 0238 4360 Fax:0086-769-22851784 Website:www.
asLitesting.com
Company Add.:Building C,JinHui Industrial Park, LiXin town,East
City district 523125,DongGuan City,China
- 5 -
(2) Exterior : W2500 × H2750× D3200mm
3-1-2 Material
(1)Interior is SUS#304 stainless steel
(2) Exterior is SUS#304 stainless steel or paint coated
(3) Thermal insulation materials: High density fire-resistant PU
foam insulation material
3-1-3 Mechanical Structure
(1)Single door with a viewing window on the front chamber
(2)Electric cabinet, refrigerator and air conditioner are in back
of electric cabinet
(3)The dehumidifier is in the back of the chamber.
3-1-4 Wind Supply Cycling System
Motor AC380V 2HP; lengthened axis; sirocco fan; forced circulation
3-1-5 Heating System
Stainless steel electric heater
3-1-6 Refrigeration System
(1)Totally-enclosed type compressor
(2)Wind cooled
(3)Evaporator: fin-type, load capacity automatic adjustment
(4)Refrigerant: environmentally safe, and have a Zero Ozone
Depletion Potential (ODP)
Technical Parameters:
| Model | THV-408(A~F) | THV-1000(A~F) | THV-1500(A~F) |
Internal Dimension W×H×D(mm) | 600×850×800 | 1000×1000×1000 | 1500×1500×1500 |
External Dimension W×H×D(mm) | 850×1950×2100 | 1300×2200×2400 | 1800×2400×3000 |
| Temperature Range | Low temperature: (A:25℃; B:0℃; C:-20℃ ; D: -40℃; E: -60℃; F: -70℃) High temperature:100℃(150℃) |
| Humidity Range | 20%~98%R.H.(10%-98% R.H. / 5%-98% R.H. is a special optional
condition, need Dehumidifier) |
| Analytic Accuracy / Distribution uniformity of temperature and
humidity | 0.1℃; 0.1% R.H/±2.0℃; ±3.0% R.H. |
| Control Accuracy of temperature and humidity | ±0.5℃; ±2.5% R.H. |
Temperature Rising / Falling
Speed Rate | Temperature rising approx. 0.1~3.0℃/min / temperature falling
approx. 0.1~1.5℃/min;
(The Falling Speed Rate Min.1.5℃/min is a special optional
condition) |
| Internal and External Material | Material of the inner box is SUS 304# stainless steel, of the outer
box is stainless steel or SEE cold-rolled steel with paint coated. |
| Insulation Material | Resistant to high temperature, high density, formate chlorine,
ethyl acetum foam insulation materials |
| Cooling System | Wind cooling or water cooling/single segment compressor(-40℃,
double segment compressor -70℃) |
| Protection Devices | Fuse-free switch, overloading protection switch for compressor,high
and low voltage coolant protection switch, over- humidity and
over-temperature protection switch, fuses, fault warning system,
water short storage warning protection |
| Optional Accessories | Inner door with operation hole(Optional) , Recorder(optional),
Water Purifier, Dehumidifier |
| Vibration Test Equipment | Choose proper vibration test bench according to customer's test
condition , the technical parameters please take Electrodynamics
Type Vibration Tester's parameters in this catalog for reference |
| Power | AC380V 3∮ 5 Lines, 50/60HZ |
4 Power
AC380V 3 phase ,5 Lines ; 50/60Hz
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past
25 years, we devoted to simulation environmental testing equipment
and Mechannical vibration and shock testing machine.HAST Un-Saturated Steam Chamber is our star products, and we had obtained the CE certification for
this machine.
FAQ
1. Are your company a trading one or a factory?
Factory ,28 years focusing on test instruments field,4 years
exporting experience.
2. After an order is placed, when to deliver?
Generally about 20 workdays, If we have finished products, we can
arrange shipment within 3 workdays.
Please be aware that our production lead times depend on specific
items and item quantities.
3. What about the warranty with after - sales services?
12 months warranty.
After the warranty, the professional after-sale service team will
provide perfect technical support,and help customer solve problems
encountered while using our product, handles guest problems and
complaints in a professional and timely.
4. What about the services and product' quality?
Service: OEM service,Design service,Buyer lable service.
Quality: Each instruments must be carried out 100% quality examination and
test, the finished products must through a third party calibration
institutions before shipping and delivery goods.
5. How to install and training?
If the products is easy to install and training, customers can
learn the operation and maintenance manual to installation and use.
If the products is hard to use, customers can come ASLi factory to
learn how to installation and use. And our engineers have a
passport, we can go to overseas.
6.What's your main products?
Environmental chambers, temperature (humidity) chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,Altitude chamber,vibration test system, mechanical shock tester,environmental combined vibration chamber,etc.
Ms. Kris
Sales
AI SI LI (CHINA) TEST EQUIPMENT CO., LTD
Company Add.:Building C,JinHui Industrial Park, LiXin town,East
City district 523125,DongGuan City,China
Tel. 0086-769-23164266
Cell.0086-136 0238 4360
Welcome our new and regular customers visit our factory about
Combined Tester Three Style Temperature Humidity and Vibration Test
Chamber, and any inquiries please feel free to contact us !
